Crossovers

On this page you will find information regarding crossovers. You can use our planning process glossary to help explain any technical terms included on this page.

Design standards for rural crossovers can be found on our standard drawings for roadworks page

What is a Crossover?

A crossover is the connection of an accessway/driveway, from the edge of the property to the road, that often crosses a footpath, nature strip or kerb. 

A crossover allows vehicles to move between the property and the road. 

Crossovers are the pathway constructed within the road reserve to enable access from a property onto the road.

Differences between an accessway and a crossover

An accessway relates to: 
  • the path used to approach the road from within a property
  • what is happening within the site only, not on the road reserve.

An accessway is also often referred to as a driveway. See our image below for clarification on the difference between an accessway and a crossover.

Image showing where a crossover sits in relation to the road reserve and private property

New crossovers and your property 

If you are seeking a new access (or changes to an existing access) from your property onto the VicRoads arterial road network, a Council planning permit is required. 

The application will be referred to VicRoads for assessment under Clause 52.29 of the Victoria Planning Provisions.

Once a planning permit has been issued by the responsible authority, a vehicle crossing permit and/or road opening permit will still be required from your local Council for the works to be undertaken.  

In addition, on a VicRoads arterial road, there may be additional requirements or approvals under the Road Management Act 2004 for any works to be undertaken within the road reserve. It is important to always check with VicRoads if there are any other requirements that need to be met, even if planning approval for access has been granted.

Considerations for new access

When assessing applications for new access, VicRoads will consider factors such as:

  • how vehicles enter and exit the road - i.e. driving forward and not reversing into traffic
  • the proposed crossover design - including location, width, angle and line of sight
  • types of vehicles and traffic generated by the proposal – i.e. trucks or delivery vehicles, cars, motorcycles and bicycles (as well as the number of these vehicles at different times)
  • existing road conditions - including traffic volume, speed and existing infrastructure (traffic lights, clearways, pedestrian crossings, and tram or bus stops)
  • any work that might be required by the site developer to make sure the crossover and road network operate safely - including provision of slip lanes, traffic islands, traffic signals, etc.

VicRoads may impose conditions on a planning permit to ensure the arterial road network continues to operate in an efficient and safe manner. 

Design standards for rural crossovers are available on our Standard drawings for roadworks page under Access & stopping bays.

For any further information, contact us

Constructing a new crossover or removing an existing crossover

Under section 63 (1) of the Road Management Act, a person must not conduct any works in, on, under or over a road without the written consent of the coordinating road authority.
 
Any works on a road corridor generally need permission from the road manager. For arterial roads, the road manager is VicRoads. 

However, there are exemptions in the Road Management (Works and Infrastructure) Regulations 2015 where crossovers may be exempt from the requirement to obtain a consent for works (if the works are not traffic impact works).

For more information on this topic you can visit our working within the road reserve page or contact us  
 

Conditions VicRoads may impose

All applications are individually assessed taking into consideration the site and the surrounding road network, as set out above.
 
Depending on the size of development proposed, VicRoads may also require additional works within the road reserve.
 
VicRoads usually require that vehicles enter and exit a property driving forward (not reversing). Other conditions may be set out, related to any aspect of the proposal, to ensure the safe and efficient operation of the arterial road network. 
 

Traffic management plans

Even if consent for works is not required, all works in the road reserve are required be done safely. This means that the preparation of a traffic management plan as per section 99A of the Road Safety Act is necessary.
 
There must always be a copy of the traffic management plan on site when workers are present.  
 
The traffic management plan is required to ensure that your work is conducted in a manner that is safe for road users and workers on the road.
 
More information and guidance on traffic management plans is available on our working within the road reserve page.

Was this page helpful?


Take a moment to tell us why. If you'd like a response to your feedback, please message us instead.